Check the cabinets to make sure they’re even along your walls. If there are any uneven sections, add shims to the space between the wall and your cabinets until they’re flush and even. Use 2-inch screws and drive them through the upper holes you created in the back of the cabinet and into the wall stud behind them.
Read more about Premade Cabinets here.
These Are the Best Kitchen Cabinets You Should Have on Your Radar
But while stripping may be the ideal for purists, it’s not always practical or absolutely necessary. A thorough cleaning followed by light sanding should be enough to prepare the surface for new paint. You’ll need a place to store cutting boards, cookie sheets, muffin tins, and other items that stack neatly on their sides. Choose a cabinet near your prep zone and add dividers that allow these items to stand on end. Removing the cabinet door makes them even easier to access.
Photo 5: Start the refinishing with a good cleaning
Using a brush attachment and vacuuming down the cabinets after sanding is a good way to begin the process of cleaning. But for perfectly clean surfaces, you need to go beyond this. Lightly rubbing down with beeswax-impregnated tack cloth is the preferred method of fine carpenters and cabinet makers. When the tack cloth comes up clean, the cabinets, too, are clean.
Masking tape to represent the space between doors and drawers. Measure carefully when you install the tape because you’ll use it to determine door and drawer sizes . The masking tape allows you to visualize the spacing and work out details before you order the doors. For this refinishing cabinets project we purchased 16 cabinet doors and eight drawer fronts along with new hinges. We found a wide selection of decorative glass at a local stained glass supply store and chose a “crossreeded” pattern.
Instead, use a dry microfiber cloth to wipe away dust and grime from the metal. If there’s a particularly greasy or grungy spot, spray just a drop or two of cleaning solution onto your cloth, scrub the dirty spot, and then wipe the metal dry. A DIY cabinet painting project is relatively approachable, but it can be a time-consuming and tedious process. For best results, you’ll need to dismount the cabinet doors and remove the hardware, tape off the surrounding walls, and place a tarp to protect floors and countertops.
Divide your stash of plastic into stacks of containers and lids. Stack containers into each other like nesting dolls and store them in a larger tray. A deep drawer is a smart organizing idea for pots and pans near the stovetop. You can also use drawers to hold dishware by adding dish divider dowels ($121, Wayfair) to keep plates, bowls, and saucers stacked tightly in place. Make sure the drawer is equipped with quality sliding hardware that can hold the weight of dishes when the drawer is fully extended. A walk-in or reach-in pantry with plenty of shelf space is a luxury, but it still needs to be organized to support all the cooking and entertaining you do.
A fresh paint job can transform the look of your kitchen cabinets, but good results aren’t always guaranteed. A professional cabinet painter has the experience and expertise to ensure that your cabinets are painted properly and look their best. Here’s what to know about how to hire out for this project. Once the corner cabinet is installed, place another one next to it. Check to make sure it’s level and add shims as necessary until it is. Drive screws through the back of the cabinet into the wall studs behind it.